Explain what type B, C and D ventilation control devices are and under what conditions they must be used?

Unlock all questions

This demo includes only 20 questions. Upgrade to access hundreds of questions, flashcards, exam simulations, and disable ads.

Full question bankExam simulationsFlashcards
From $24.99Unlock all

Study for the Queensland Coal Mining Ventilation Officer Law Exam. Study with flashcards and multiple choice questions, each question has hints and explanations. Get ready for your exam!

Multiple Choice

Explain what type B, C and D ventilation control devices are and under what conditions they must be used?

Explanation:
Ventilation control devices are chosen to match the level of risk and the need to isolate or direct airflow in a mine. The different types correspond to how much sealing and strength the device provides, and the conditions under which it must be used. Type B is a lower-rated device, suitable where naturally occurring flammable gas is present but not enough to reach the lower explosive limit under any circumstances. It is specified with a lower pressure rating (about 35 kPa, or 5 psi), reflecting that the risk environment does not require heavy-duty isolation. Type C sits in the middle, used in areas not covered by B or D, with a higher rating (about 140 kPa, or 20 psi). This allows stronger isolation in conditions that pose more risk than B but aren’t the most severe scenario. Type D is the highest-rated, used when an explosive atmosphere exists and there is a potential ignition source, particularly if people remain underground. It has the strongest capacity (about 345 kPa, or 50 psi) to ensure robust isolation and safety in the most hazardous conditions. The other options don’t fit the standard risk-based framework for these devices, such as assigning arbitrary areas to a single type, using these devices only for maintenance or near water, or labeling them as discretionary.

Ventilation control devices are chosen to match the level of risk and the need to isolate or direct airflow in a mine. The different types correspond to how much sealing and strength the device provides, and the conditions under which it must be used.

Type B is a lower-rated device, suitable where naturally occurring flammable gas is present but not enough to reach the lower explosive limit under any circumstances. It is specified with a lower pressure rating (about 35 kPa, or 5 psi), reflecting that the risk environment does not require heavy-duty isolation.

Type C sits in the middle, used in areas not covered by B or D, with a higher rating (about 140 kPa, or 20 psi). This allows stronger isolation in conditions that pose more risk than B but aren’t the most severe scenario.

Type D is the highest-rated, used when an explosive atmosphere exists and there is a potential ignition source, particularly if people remain underground. It has the strongest capacity (about 345 kPa, or 50 psi) to ensure robust isolation and safety in the most hazardous conditions.

The other options don’t fit the standard risk-based framework for these devices, such as assigning arbitrary areas to a single type, using these devices only for maintenance or near water, or labeling them as discretionary.

More Multiple Choice Questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy